chrmium for google search

http://izaka.pixnet.net/blog/post/24865681

google 搜尋二列，加縮圖

網路測試速度

http://www.speakeasy.net/speedtest/

黑蘋果1

什麼是DSDT?
裝MAC時須要的drive

http://www.blogger.com/post-create.g?blogID=8367876612993573597



dmg(HFS+) to iso
http://www.yasasoft.com/press_release/convert_dmg_file_to_iso_image.htm

外接讀卡機

網路上199nt 的unitek 為 gl826 晶片的讀卡機
--------------------------------------

創見 rdp8 效能沒有比較好，但是塑膠模組上比上述的好。
-----

總和: 效能上199nt 比創見的好，價格上也是。
在外殼塑膠模組上 創見的比較吻合

freenas BT設定

submask 全設定為"0000"

preferret是 較喜歡加密的點對點連線

-er --encryption-required Encrypt all peer connections
all都要加密

-ep --encryption-preferred Prefer encrypted peer connections
以加密為優先，or 較喜歡*預設

-et --encryption-tolerated Prefer unencrypted peer connections
較喜歡非加密.

設定為er時，把port 1723 tcp打開


http://ejesconsulting.wordpress.com/2009/07/20/bittorrents-in-freenas/

超頻 overclocker

buffer whr-g54 能200 超250 ,但240較ok 適合

linksys wrt54g v2.2 能200 超300 現在超252 can .

都run過1星期up

google

wrt54g overclock 300

or 240

DS409+ iSCSI 增加連線數

Guys,

I got the following steps from support.

1. Please kindly access your system server via console

2. use "root" account to login with the same password as admin.

3. Type the following command line to initiate Multiple iSCSI support.
ietadm --op update --tid=1 --maxsessions=N

After applying these steps, I have the follwing findings.

1> tid can be find in /etc/iscsitrg.conf

2> N is the number of Max. session you want.

3> You have to run this command for each target on your system. if you change the setting on the control panel, you have to run this command again it order for it to work.

4> I can mount the same target on two servers, Server1 and Server2, but the files and folders I created by Server1 can only view and edit on Server1. Server2 cannot see them at all. I did the samething on Server2, and it is also not showing on Server1. I have no idea if I did something wrong or it is a bug with Beta 2.2. Both of my Server1 and Server2 are running Windows 2008 Ent. 64-bit.

5> I have try to create the target with both CRC Checksum on and off, it is still the same as point 4 above.

6> If I reboot the NAS, I need to run ietadm again

Maybe some of you can give it a try and see if you have the same problem.

Eddy
8^)

---
http://forum.synology.com/wiki/index.php/How_to_use_the_iSCSI_Target_Service_on_the_Synology_DiskStation#How_to_enable_iSCSI_on_the_Synology_DiskStation